How To Adjust Watch Band Clasp Ideas. Reattach the clasp piece with the end of the watch band by joining the band and. At this point, the links that need to be removed from one side of the clasp should come loose.
Use the pin punch and the hammer to push out the pin that supports the link you want to remove. Adjust the wristband on your wrist to estimate the number of mesh links to be removed. Place the tip of a pin remover against the pin's head of the link you wish removed.
Note That The Pin Should Fit With The Metal Hoop.
To open the secuirty clasp lift the loose bar as shown, then pinch the clips either side of the clasp to release it. Slide a pushpin into the opening of that link until the pin. Use the paper clip to help you engage the clasp with the pin.
Position The Watch Band Securely In The Slots Of A Holding Block.
Center the point of the pin pusher over the link pin in the watch band. Then, take your watch off and lay it flat. The clasp will now unfold.
Apply Gentle Pressure And Push The Spring Bar Tool Inwards And Downwards, Detaching The Strap.
Use the hammer to gently knock on the pin remover, which will push the pinout. To adjust your watch band, first put your watch on and squeeze the links together around the clasp to count how many links you need to remove. You only need a single tool and the adjustment to your watch band can be made in minutes.rea.
If Your Strap Has A Metal Ferrule, Put The Ferrule Back Where The Strap Connects, And Then Insert The Pin Back Into The Hole.
The arrows inside the wristband should point downward. The cloth prevents the watch from scratching. The further you go, the tighter the watch gets.
Use The Pin Punch And The Hammer To Push Out The Pin That Supports The Link You Want To Remove.
Push the pin on the end of the buckle mechanism into one of the many holes on the other strap. Adjust the wristband on your wrist to estimate the number of mesh links to be removed. This works the other way around as well.